Honeywell ACUIX ES, Руководство по установке и настройке

Страница: 61 / 86

ACUIX TM ES Installation and Configuration Guide
Document 800-01949 Rev D 61
05/09
Configuring Presets and Preset Tours
Note Presets are also called PreShots on some controllers.
Continuous preset tour operation for extended periods of time (more than eight hours)
is not recommended. Continuous operation results in increased zoom lens wear and
maintenance expense. Similarly, avoid setting auto focus to continuous.
Table 3-4 Preset and Preset Tour Functions
Task/Action with Default Notes
Programming Preset Tours
1. Select 6 Function Programming > 2 Program a
Preset Tour .
2. Select a preset tour NUM (number) to program.
3. Select each Preset already programmed to use in
the preset tour.
4. Select a Velocity between each preset (1 to
360°/second). The default is 360°/second.
5. Select a Dwell time for how long the dome waits
before it goes to the next preset in the list. Select
from
1 to 99 seconds .
6. Select S to save, E to exit or D to delete.
• Inserting presets: To insert a preset between
presets, position the cursor on the second preset
and press
Focus Near (+) to insert a line.
• Deleting presets: To delete a preset, place the
cursor on the preset line and press
Focus Far (-) .
The entire preset line is deleted.
Running Preset Tours Using Special Presets
1. Program a preset tour.
2. Select the applicable preset number:
• 87 > Preset to run preset tour 1.
• 88 > Preset to run preset tour 2.
• 89 > Preset to run preset tour 3.
IF the dome is sent to an unprogrammed preset,
DOES
NOT EXIST
displays on the monitor.
Program Preset Tour
NUM PRESET VELOCITY DWELL
1 -- --- --
2 -- --- --
3 -- --- --
4 -- --- --
5 -- --- --
6 -- --- --
7 -- --- --
D = Delete E = Exit S = Save
ESC to Exit