56
Configuring the ACUIX ES
Configuring the Image Quality and Video Display Settings
Setting the Pan Offset
1.
Select
3 Control Options
>
4 Set Pan and Tilt
Options
>
6 Pan Offset
>
1 Pan Offset
>
ON
.
2.
Press
0
>
Preset
.
3.
Position the dome where Preset 0 is expected to
be. If it does not go to the previously known
position for Preset 0, the offset function cannot be
used.
4.
Select
3 Control Options
>
4 Set Pan and Tilt
Options
>
6 Pan Offset
>
2 Set Pan Offset
.
5.
Test the setting. Reposition the unit, and select
0
>
Preset
to confirm it returns to the position
programmed.
•
Pelco P and D protocols only: The pan offset
feature is not available due to the preset index
starting at 1 (instead of 0).
•
For all other protocols, Preset 0 is used to define
the location of the pan setting; you must know the
original positioning of Preset 0 to complete these
steps.
•
The pan offset feature is useful when a new scan
assembly is installed in a dome and you want to
transfer programming from the previous scan
assembly to the new dome using the
upload/download feature.
Turning the Startup State Restore ON or OFF
1.
Select
3 Control Options
>
4 Set Pan and Tilt
Options
>
7 Startup State Restore
>
2.
Select
ON
or
OFF
(default).
If you select ON the message
Extreme
Caution: This will move the dome to
previous shutdown position on
startup...
displays.
•
Select
Y
(yes) to continue or
N
(no) to cancel.
ON sets the dome to return to the state of operation at
the last loss of power.
Displaying Pan and Tilt Coordinates on the Monitor
•
Select
4 Diagnostics Options
>
1 Coordinates
>
ON
or
OFF
(default).
ON displays the pan (zimuth) and tilt
(elevation/declination) along the bottom of the monitor.
See
System Administration and Settings
for
other Diagnostic Options menu features.
Changing the Auto Focus Mode
•
Select
3 Control Options
>
6 Auto Focus
>
OFF
to manually focus the lens or
Z
(default) to auto
focus the lens when the zoom setting changes or
PTZ
to auto focus the lens when the pan, tilt, or
zoom positions change.
Minimum focus distance is set at 3.3 ft (1.0 meter) from
the camera lens in both manual and automatic focus
mode. When the zoom is changed it must automatically
focus; optionally when pan, tilt or zoom is changed it
must also auto focus.
Only qualified technical personnel should use the
Camera Options
menu to change
configurations as these changes can make the video unusable.
Task/Action with Default
Notes
Содержание ACUIX ES
