Honeywell Home CN80G Series, Руководство пользователя

Страница: 64 / 124

54 CN80G Mobile Computer Series User Guide
Decode Security Use this setting to control the reading tolerance of the decoder.
Lower settings are more lenient when reading low quality
barcodes while higher values are more strict. 2
Decoder
Timeout Set the amount of time in milliseconds that the scanner will
timeout if a readable barcode is not found. 150
Poor Quality 1D
Reading Enable this setting when scanning damaged or badly printed 1-
D barcodes to improve barcode read success. Disabled
Video Mode Use this setting to specify whether normal or inverse decoding
for linear symbologies is enabled during the execution of
Decode. By default normal video is enabled. Options include:
• Normal
• Inverse
• Normal and Inverse
Normal
DPM Mode Use this setting when scanning Direct Part Marking (DPM)
barcodes that are etched or imprinted directly into the surfaces
of the materials including metal and plastic.
Options include:
• No DPM optimization
• Dotpeen DPM decoding
• Reflective DPM decoding
No DPM
optimization
Region of
Interest Set the ROI for decoding. Options include:
• Disable
ROI is disabled and the entire original image is sent to
the decoder.
• Standard
Use the aimer position to weight activity. Activity
calculated on the row and the column in the middle of
each cell. The ROI window may not include the aimer.
• Standard, aimer centered
Activity calculated on the row and the column in the
middle of each cell. The ROI window will always include
the aimer.
• DPM, aimer centered
Activity calculated on 4 rows and 2 columns in each cell.
The ROI window will always include the aimer.
• Kiosk/presentation application
Ignore aimer position, no weight activity. Activity
calculated on the row and the column in the middle of
each cell. The ROI window may not include the aimer.
• Learning Engine
When selected, the computer will receive continuous
updates to improve the decoder software based on your
specific environment. The Staging Hub Agent must also
be enabled.
Disabled
Setting Description Default