Honda XL125LK, Руководство пользователя, Страница: 41 / 243

2-6
dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
EXHAUST PIPE/MUFFLER
REMOVAL/INSTALLATION
Remove the right side cover (page 2-2).
Loosen the muffler band bolt [1].
Remove the following:
– Front mounting bolt [2] and washer [3]
– Rear mounting bolt [4] and nut [5]
– Muffler [6] and gasket [7]
– Exhaust pipe joint nuts [8]
– Exhaust pipe [9]
– Gasket [10]
• Replace the muffler gasket and exhaust pipe gasket with new ones.
• Temporarily install the exhaust pipe and muffler in the reverse order of removal by loosely installing all the
fasteners. Tighten the exhaust pipe joint nuts first, then tighten the muffler band bolt, muffler mounting bolt
and nut. After installation, inspect the exhaust system for leaks.
When replacing the stud bolt [1], check that the stud
length is within specification as shown.
[9]
[6]
[5]
[1]
26 N·m
(2.7 kgf·m, 19 lbf·ft)
[8]
[4]
[2] 26 N·m
(2.7 kgf·m, 19 lbf·ft)
18 N·m (1.8 kgf·m,
13 lbf·ft)
20 N·m (2.0 kgf·m, 15 lbf·ft)
[10]
[7]
14 N·m (1.4 kgf·m,
10 lbf·ft)
[3]
21.5 ± 1.0 mm
(0.85 ± 0.04 in)
[1]