Honda WX15T, Руководство пользователя

Страница: 23 / 100

3-4
dummyhead dummyhead
MAINTENANCE
ENGINE OIL LEVEL CHECK/CHANGE
CHECK
Place the engine on a level surface.
Remove the oil filler cap [1], and wipe the oil level
gauge [2] clean.
Insert the oil filler cap without screwing it into the oil filler
neck.
Remove the oil filler cap and check oil level shown on
the oil level gauge.
If the oil level is low, fill with recommended oil to the
upper level of the oil filler neck.
CHANGE
Place the engine on a level surface and place a suitable
container under the drain plug bolt [1].
Remove the oil filler cap [2], drain plug bolt, and drain
plug washer [3] and drain the oil into a suitable
container.
Please dispose of used oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it
in the trash, pour it on the ground, or pour it down a
drain.
Install the drain plug bolt with a new drain plug washer
and tighten it to the specified torque.
[1]
[2]
UPPER LIMIT
LOWER LIMIT
Used engine oil contains substances that have
been identified as carcinogenic.
If repeatedly left in contact with the skin for
prolonged periods, it may cause skin cancer.
Wash your hands thoroughly with soap and water
as soon as possible after contact with used engine
oil.
TORQUE: 10.8 N·m (1.1 kgf·m, 8 lbf·ft)
[2]
[3]
[1]
[4]
SERVICE BULLETIN #9