Honda ST1300 2006, Инструкции по установке

Страница: 3 / 28

ii
©2006 American Honda Motor Co., Inc. - All Rights Reserved
2006 ST1300/A
How To Use This Manual
Follow the complete sequence of steps as shown. Do not short-cut any steps. The sequence has
been established to ensure the unit is properly assembled.
The individual steps are composed of three components:
•
Sub-heading—The large sub-headings are a brief description of the step. They are intended
to be used by the experienced technician, one who only needs a brief reminder of the
set-up sequence.
•
Descriptive text—The descriptive text explains in detail what is to be done during that step.
This explanation is intended as a guide for the technician needing additional information.
•
Photographs/Line art—The photographs or line art support both the sub-headings and the
detailed text.
Modifications and Accessories
Modifications that you may have made, or should make in the future, to any Honda product, shall
be deemed by our company to have been performed at your sole risk and responsibility, and
without our company's or the manufacturer's approval, or consent, implied or expressed. We
further disclaim any and all liability, obligation, or responsibility for any defects of modified parts
or of the modified product, and for any claims, demands, or causes of action for damage to
property or for personal injuries resulting from the modification of said Honda product.
Indicates the set-up section Indicates the pre-delivery section
Torque Table
ITEM SIZE TORQUE
Reflector nut 6 mm 12 N · m (1.2 kgf · m, 9 lbf · ft)
Front fender bolt 6 mm
12 N
·
m (1.2 kgf
·
m, 9 lbf
·
ft)
Front axle bolt -------- 79 N · m (8.1 kgf · m, 58 lbf · ft)
Pinch bolt 8 mm 22 N · m (2.2 kgf·m, 16 lbf · ft)
Caliper bolt 8 mm 31 N · m (3.2 kgf · m, 23 lbf · ft)
Mirror bolt 6 mm
12 N
·
m (1.2 kgf
·
m, 9 lbf
·
ft)
Windscreen bolt 6 mm 12 N · m (1.2 kgf · m, 9 lbf · ft)
Windscreen cover screws 4 mm
1.0 N
·
m (0.1 kgf
·
m, 0.7 lbf
·
ft)
Handlebar cover 6 mm 1.2 N · m (0.12 kgf · m, 0.9
lbf · ft)
Engine guard cover 6 mm
9.0 N
·
m (0.9 kgf
·
m, 6.6 lbf
·
ft)
Oil filler cap -------- 12 N · m (1.2 kgf · m, 9 lbf · ft)