2006 ST1300/A
22
©2006 American Honda Motor Co., Inc. - All Rights Reserved
24. Check the tire pressure.
Front and rear: 42 psi.
25. Check the clutch lever and sidestand
ignition cut-off switches.
When the transmission is in gear, the starter
should not work unless the clutch lever is
pulled in and the sidestand is up.
Position the motorcycle securely with the rear
wheel raised off the ground.
Clutch lever ignition cut-off switch test:
Shift the transmission into gear.
Raise the sidestand and without pulling the
clutch lever in, turn on the ignition, set the
engine stop switch to the RUN position, and
press the starter button.
If the engine starts, there is a problem with
the clutch lever ignition cut-off switch.
Troubleshoot the cause.
Sidestand ignition cut-off switch test:
Shift the transmission into gear.
Lower the sidestand and pull the clutch lever
in. Turn on the ignition, set the engine stop
switch to the RUN position, and press the
starter button.
If the engine starts, there is a problem with
the sidestand ignition cut-off switch.
Troubleshoot the cause.
