2006 ST1300/A
18
©2006 American Honda Motor Co., Inc. - All Rights Reserved
17. Service and install the battery (cont.).
Reinstall the front seat:
Insert the seat prong under the tank and align
the two recesses with the prongs at the rear
of the tank. Make sure that the seat adjust-
ment guides align with the holes in the seat
and push down on the rear of the seat to
secure it into position.
Reinstall the rear seat:
Reinstall the rear seat by following the
instructions in step 13.
Install the right saddlebag:
Use the ignition key to open the latch lever.
Position the three slots of the saddlebag
on the three hooking points on the
motorcycle as shown. Check that the
saddlebag engages securely.
Close the latch lever and lock it with the
ignition key.
Remove the ignition key and place it in the
ignition switch in the OFF position.
FRONT SEAT
HOLES
PRONG
RECESSES
PRONGS
SEAT ADJUSTMENT
GUIDES
LATCH
LEVER
HOOKING
POINTS
SLOTS
SADDLEBAG
