Honda HSM1380i, Руководство пользователя

Страница: 99 / 130

97
10. TRANSPORTING
Spilled fuel may ignite. To avoid fuel and oil spillage, keep the snow
thrower level when transporting.
Loading the snow thrower on a trailer should be performed on a firm,
level surface.
Before loading:
1. Loading the snow thrower on a truck or trailer should be performed
on a level firm, level surface.
2. Use a loading ramp that is strong enough to support the combined
weight of the snow thrower and the operator:
Weight of snow thrower: (Operating weight)
• HSM1380i: 245 kg (540 lbs) (ETD type), 255 kg (562 lbs) (ETDR type)
• HSM1390i: 265 kg (584 lbs) (ETDR type)
3. The loading ramp must be long enough so that its slope is 15° (26%)
or less.
Recommended ramp lengths are shown in the following table:
4. If the truck bed has a low roof or cover, with less than 1.5 m (5 ft) of
headroom, lower the dischage deflector for better clearance.
5. Before loading, check that there is sufficient fuel in the tank. Engine
may stall on the ramp if there is little fuel in the tank.
l
h
Length of Ramp
(l) 2.5 m
(8.2 ft)
3.0 m
(9.8 ft)
3.5 m
(11.5 ft)
Height (h)
50 cm
(1.6 ft)
60 cm
(2.0 ft)
70 cm
(2.3 ft)
36V156410.book 97 ページ ２０１８年１０月１０日 水曜日 午前１１時３０分