Honda HS1336i, Руководство пользователя

Страница: 52 / 144

50
OPERATION
Auger Housing Height
1. Operate the auger housing control switch back and forth. The auger housing
height can be adjusted without discrete steps.
To raise: Pull the auger housing control switch to UP.
To lower: Push the auger housing control switch to DOWN.
2. Release the auger housing control switch, and the auger housing is secured
in the position.
HIGH: Use this position when clearing the snow in steps and use it
when reversing or driving the snow blower. (When the mode
selector switch is in AUTO or POWER, use this position when
reversing the snow blower.)
MIDDLE: Position for normal clearing. (Use this position to clear the snow
normally.)
LOW: Position for clearing hardened snow. (Use this position when
the snow you are to clear is hardened and the snow clearing
part of the snow blower tends to get raised.)
HIGH (UP)
MIDDLE
LOW (DOWN)
AUGER HOUSING
AUGER HOUSING
CONTROL SWITCH
DOWN
UP
31V156250.book 50 ページ ２０２０年１２月２２日 火曜日 午後１時３６分