Honda HS1336i, Руководство пользователя

Страница: 62 / 144

60
OPERATION
3c. Clearing in MANUAL mode
Nothing is controlled automatically when the mode selector switch is set in
the MANUAL position. Engine speed and operating speed can be adjusted
freely by selecting the MANUAL mode.
1) Set the throttle control lever in the third
position from the bottom.
2) Operate the chute control switch to
adjust the snow discharge direction and
angle (see page 27).
3) Operate the auger housing control
switch to adjust the auger to be parallel
to the road surface (see pages 50 and
52).
USA model only:
• You can return the auger to the initial
position by pushing the reset switch.
• If you return the auger to the initial
position by pushing the reset switch, the
auger can hit against the road surface or
can be raised from the road, resulting in
some snow left on the ground,
depending on the road condition and
the position of the snow blower.
Adjust the auger height position as
needed.
THROTTLE CONTROL LEVER
3rd
MANUAL mode
CHUTE CONTROL
SWITCH
RESET SWITCH
(USA model only)
AUGER HOUSING
CONTROL SWITCH
31V156250.book 60 ページ ２０２０年１２月２２日 火曜日 午後１時３６分