9. Apply transparent tape over axle grooves to protect seal during disassembly.
10. Remove the 22 mm snap ring and washer from the inside of the rear adjuster arm.
11. Remove the 6 x 12 screws and rear axle holder and remove the transmission
assembly.
12. Disconnect the drive clutch cable from the cable stay on the transmission bracket.
13. Unhook the tension spring from the transmission bracket and remove the
transmission.
[1]
REAR ADJUSTER ARM
[2]
AXLE SHAFT GROOVE
[3]
TENSION SPRING
[4]
RIGHT REAR ADJUSTER ARM
[5]
AXLE HOLDER (2)
[6]
HST ASSEMBLY
[7]
SHIFT CABLE
[8]
DRIVE CLUTCH CABLE
[9]
SCREW, 6 x 12 mm (4)
[10]
LEFT REAR ADJUSTER ARM
[11]
WASHER (2)
[12]
SNAP RING, 22 mm (2)
[13]
SHIFT CABLE
[14]
SPRING TENSIONER PLATE
- 87 -
HRA536 - HRD535 - HRD536
[13]
[14]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
- REAR DRIVE SYSTEM
[1]
[2]