15.4 Wire / Harness routing
[1]
CONTROL BOX (electrical starter type only)
See ch. 16.1 for wire harness connection.
[2]
MAIN WIRE HARNESS (electrical starter type only)
HRD535/K1/K2
[3]
OIL FILLER TUBE
Route the all wire harnesses between the oil filler tube and crankcase.
[4]
CHARGING COIL WIRE
[5]
IGNITION COIL WIRE
[6]
STARTER MOTOR
HRD536/K1/K2
[7]
OIL FILLER TUBE
Route the charging coil and ignition coil wires between the oil filler tube and crankcase.
[8]
HANDLE JOINT KNOB
[9]
WIRE BAND
Clamp wire harness and all control cables to handle.
[10]
CABLE CLAMP
Clamp shift cable (S type only) and wire harness.
[11]
RECOIL STARTER ROPE
[12]
WIRE BAND
Clamp wire harness to handle.
[13]
DISCHARGE GUARD
Route all cables and wire harness clear from edge of discharge guard.
HRA536
[14]
WIRE BAND (3)
[15]
SHIFT CABLE
[16]
THROTTLE CABLE
[17]
ROTOSTOP CABLE
- 111 -
HRA536 - HRD535 - HRD536
[1]
[2]
[3]
[4]
[5]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[17]
[14]
[15]
[16]
170 mm
170 mm
200 mm
350 mm
280 mm
70 - 80 mm
HRD535/K1/K2
HRD536/K1/K2
HRA536
- HANDLE / CONTROL LEVERS