Honda EU3000i Handi, Руководство пользователя

Страница: 172 / 194

CYLINDER BLOCK
15-7
PISTON SKIRT O.D.
Measure and record the piston O.D. at a point 10 mm
(0.4 in) from the bottom of the skirt and 90 degrees to
the piston pin bore.
If the measurement is less than the service limit,
replace the piston (page 15-5).
PISTON-TO-CYLINDER CLEARANCE
Subtract the piston skirt O.D. from the cylinder sleeve
I.D. to obtain the piston-to-cylinder clearance.
If the calculated clearance is more than the service
limit, replace the piston (page 15-5) and recheck the
clearance.
If the clearance is still more than the service limit with
the new piston, replace the cylinder barrel (page 15-4).
PISTON PIN BORE I.D.
Measure and record the piston pin bore I.D. of the
piston.
If the measurement is more than the service limit,
replace the piston (page 15-5).
STANDARD: 67.965 – 67.985 mm
(2.6758 – 2.6766 in)
SERVICE LIMIT: 67.845 mm (2.6711 in)
90°
10 mm (0.4 in)
STANDARD: 0.015 – 0.050 mm
(0.0006 – 0.0020 in)
SERVICE LIMIT: 0.12 mm (0.005 in)
STANDARD: 18.002 – 18.008 mm
(0.7087 – 0.7090 in)
SERVICE LIMIT: 18.048 mm (0.7106 in)