uu
Child Safety
u
Safety of Infants and Small Children
62
Safe Driving
1.
Place the child seat on the vehicle seat.
2.
Route the seat belt through the child seat
according to the seat maker's instructions,
and insert the latch plate into the buckle.
u
Insert the latch plate fully until it clicks.
3.
Slowly pull the shoulder part of the belt all
the way out until it stops. This activates the
lockable retractor.
4.
Let the seat belt completely wind up into
the retractor, then try to pull it out to make
sure the retractor is locked.
u
If you are able to pull the shoulder belt
out, the lockable retractor is not
activated. Pull the seat belt all the way
out, and repeat steps 2 – 4.
5.
Grab the shoulder part of the seat belt near
the buckle, and pull up to remove any slack
from the lap part of the belt.
u
When doing this, place your weight on
the child seat and push it into the vehicle
seat.
■
Installing a Child Seat with a Lap/Shoulder Seat Belt
1
Installing a Child Seat with a Lap/Shoulder Seat Belt
A child seat that is not properly secured will not
adequately protect a child in a crash and may injury
to the child or other vehicle occupants.
12 US ODYSSEY Revision-31TK86102.book 62 ページ 2015年10月8日 木曜日 午前11時47分