147
uu
Operating the Switches Around the Steering Wheel
u
Brightness Control
Co
ntrols
Brightness Control
When the ignition switch is in ON
(
w
, you can
use the brightness control knob to adjust
instrument panel brightness.
Brighten:
Turn the knob to the right.
Dim:
Turn the knob to the left.
You will hear a beeper when the brightness
reaches minimum or maximum. The
information display
*
/multi-information
display
*
will return to its original state several
seconds after you adjust the brightness.
■
Brightness level indicator
The brightness level is shown on the
information display
*
/multi-information
display
*
while you are adjusting it.
1
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
Pressing the
(
SEL/RESET
) knob or the
/
(information) button
*
switches the display.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.
Control Knob
On multi-information display
On information display
* Not available on all models
12 US ODYSSEY Revision-31TK86102.book 147 ページ 2015年10月8日 木曜日 午前11時47分