282
Features
Compass
*
When you turn the ignition switch to ON
(
w
, the compass self-calibrates, and the
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the compass display blinks, you
need to manually calibrate the system.
1.
Turn the ignition switch to ON
(
w
.
2.
Press and hold the
SETUP
button until the
display shows the compass setting menu
list.
3.
Rotate
to
select
Calibration
, then press
.
4.
When the display changes to
Start
Calibration
, press
.
5.
Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
1
Compass calibration can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1
Calibrate the compass in an open area.
While setting the compass:
•
The RETURN button returns to the previous screen.
•
The SETUP button cancels the setting mode.
* Not available on all models
12 US ODYSSEY Revision-31TK86102.book 282 ページ 2015年10月8日 木曜日 午前11時47分