195
uu
Audio System
u
USB Adapter Cable
*
Features
USB Adapter Cable
*
1.
Unclip the
USB
connector and loosen the
adapter cable.
2.
Install the
iPod
®
dock connector or the
USB
flash drive to the
USB
connector.
Auxiliary Input Jack
Use the jack to connect standard audio devices.
1.
Open the
AUX
cover.
2.
Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.
u
The audio system automatically switches
to the
AUX
mode.
1
•
Do not leave the
iPod
®
or
USB
flash drive in the
vehicle. Direct sunlight and high temperatures may
damage it.
•
Do not use an extension cable with the
USB
adapter cable.
•
Do not connect the
iPod
®
or
USB
flash drive using
a hub.
•
Do not use a device such as a card reader or hard
disk drive, as the device or your files may be
damaged.
•
We recommend backing up your data before using
the device in your vehicle.
•
Displayed messages may vary depending on the
device model and software version.
If the audio system does not recognize the
iPod
®
, try
reconnecting it a few times or reboot the device. To
reboot, follow the manufacturer's instructions provided
with the
iPod
®
or visit
1
To switch the mode, press any of the audio mode
buttons. You can return to the
AUX
mode by
pressing the
AUX
button.
You cannot use the auxiliary input jack if you replace
the audio system.
State or local laws may limit the circumstances in
which you can launch or control your attached audio
device.
* Not available on all models
12 US ODYSSEY Revision-31TK86102.book 195 ページ 2015年10月8日 木曜日 午前11時47分