Honda 2006 Accord, Руководство пользователя

Страница: 88 / 569

This indicator has two functions:
It comes on when you turn the
ignition switch to ON (II). It is a
reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the rear brakes, axles and
tyres.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). If this
indicator comes on at any other time,
there is a problem in the ABS. If this
happens, take the car to your dealer
to have it checked. With the
indicator on, your car still has normal
braking ability but no anti-lock. You
will see the symbol ‘‘
’’ or the
symbol with a ‘‘CHECK SYSTEM’’
system on the multi-information
display. For complete information,
see page
.
If you drive without releasing the
parking brake, a chime will sound,
and you will also see the symbol
‘‘
’’ or the symbol with a
‘‘RELEASE PARKING BRAKE’’
message on the multi-information
display.
If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem with the brake
system. Also, you will see the
symbol ‘‘
’’ or the symbol
with a ‘‘BRAKE FLUID LOW’’
message, or the symbol ‘‘
’’
(on some types) or the symbol
with a ‘‘CHECK SYSTEM’’
message (on some types) on the
multi-information display. For
more information, see page
.
This indicator also blinks several
times when you turn the ignition
switch from the ON (II) to the
ACCESSORY (I) or the LOCK (0)
position.
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will then go off
if you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
1.
2.
388
526
131
Parking Brake and
Brake System Indicator Anti-lock Brake System
(ABS) Indicator
Immobilizer System
Indicator
Indicator Lights
Instruments and Controls
85
05/10/21 11:53:55 32SEA630_088