Honda 2006 Accord, Руководство пользователя

Страница: 224 / 569

−
−
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars.
Use the TUNE bar to tune
the radio to a desired frequency.
Press the
side of the bar to tune
to a higher frequency, and the
side to tune to a lower
frequency. The frequency numbers
will start to change rapidly. Release
the bar when the display reaches the
desired frequency. To change the
frequency in small increments, press
and release the TUNE bar quickly.
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pushing the PWR/
VOL knob or the AM/FM button.
Adjust the volume by turning the
same knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ‘‘ST’’ will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
The SEEK function
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar on either the
or
, then release it. Depending on
which side you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
CONTINUED
TUNE
Operating the Radio SEEK
Audio System (B Type)
Comf ort and Convenience Features
221
05/10/03 19:55:06 32SEA630_224