Honda 2006 Accord, Руководство пользователя

Страница: 337 / 569

To hear a list of available options
at any time, press the Talk button,
wait for the beep, and say, ‘‘Hands
free link help.’’
To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, and 11.
To skip a voice prompt, press the
Talk button while the HFT system
is speaking. The HFT system will
then begin listening for your next
command.
To go back one step in a command
process, say, ‘‘Go back,’’ or press
the Back button.
If nothing is said while the HFT
system is listening for a command,
the HFT system will time out and
stop its voice recognition. The
next time you press the Talk
button, the HFT system begins
listening from the point at which it
timed out.
To end a command sequence at
any time, press and hold the Back
button, or press the Talk button,
wait for the beep, and say, ‘‘Cancel.’’
The next time you press the Talk
button, the HFT system begins
from its main menu.
When you finish a command
sequence, the HFT system goes
back to its main menu. For
example, when you store the name,
‘‘Eric,’’ the HFT system response
is, ‘‘Eric has been stored.’’ The
next time you press the Talk
button, you will be at the main
menu.
The incoming notification of the
HFT system can be set to a ring tone,
a prompt, or no notification.
Many commands can be spoken
together. For example, you can
say, ‘‘Dial 123-456-7890.’’
Press and release the Talk button.
After the beep, say ‘‘System.’’ The
HFT system response is, ‘‘System
options are setup and clear.’’
Press and release the Talk button.
After the beep, say ‘‘Setup.’’ The
HFT system response is ‘‘Would
you like an audible notification of
an incoming call?’’
1.
2.
To set up the system, do this:
Hands-Free Telephone (HFT) System (For some types)
Comf ort and Convenience Features
Setting Up the System
334
05/10/03 20:09:01 32SEA630_337