Honda 2006 Accord, Руководство пользователя

Страница: 478 / 569

Your car has two bulbs on each side,
four in total. Make sure you are
replacing the bulb that is burned out.
Your car uses halogen headlight
bulbs. When replacing a bulb, handle
it by its plastic case and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
The low beam headlight bulbs are a
type of high voltage discharge tube.
High voltage can remain in the
circuit even with the light switch off
and the key removed. Because of
this, you should not attempt to
examine or change a low beam
headlight bulb yourself. If a low
beam headlight bulb fails, take the
car to your dealer to have it replaced.
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a
scratch on the glass can cause the
bulb to overheat and shatter.
The headlights were properly aimed
when your car was new. If you
regularly carry heavy items in the
boot or pull a trailer, readjustment
may be required. Adjustment of the
headlights should be performed by a
qualified technician.
The vertical angle of the headlights
can be adjusted. For complete
information, see page
.
Your car is equipped with an
automatic headlight adjusting
system that adjusts the vertical angle
of the headlights (low beam)
automatically. Refer to page
for
more information.
154
154
On cars with headlight adjuster
On cars with high voltage discharge
type low beam headlights
Headlight Aiming Replacing a Headlight Bulb Headlights with High Voltage
Discharge Tubes
(For some types)
Lights
Maintenance
475
05/10/03 20:27:53 32SEA630_478