4
SUPER FINISH MAX
®
SPRAYER
(C800971)
ENGLISH
FAST START QUICK REFERENCE GUIDE
Cleaning Instructions
Spraying Instructions
This is only a quick reference.
Read the entire instruction manual prior to using the product.
SKIN INJECTION HAZARD RISK OF EXPLOSION OR FIRE HAZARDOUS VAPORS
Read all warnings and safety instructions in the owner’s manual before use.
6. Plug sprayer into outlet.
7. Adjust spray pattern to horizontal,
vertical, or cone. (See page 7.)
8. (–) Turn counter clockwise for
less flow and finer spray pattern.
(+) Turn clockwise for more flow
and larger spray pattern.
9. Spray surface, keeping sprayer
level. Use a sweeping and
overlapping motion.
5. Attach container to sprayer.
6
7
8
9
HAZARDOUS VAPORS
1. Thin material as necessary.
(See page 5.) Remove and fill
container with material. Use a
filter to strain material if it is old.
2. Determine size of tip and needle
you will need by referring to
chart on page 5.
3. Select the proper Air Cap.
Black: Fine spray pattern.
Yellow: Wide spray pattern
4. Insert the pick-up tube into the
cylinder housing. See Page 6,
Figure B to determine orientation
of pick-up tube.
Black
Yellow
1
2
3
4
5
1. Unplug sprayer, remove
container, and empty contents.
2. Fill sprayer with cleaning
solution, plug in sprayer, and
operate trigger until solution
comes through nozzle. Do not
submerge in liquid.
3. Remove parts. Clean and dry
thoroughly according to Step
Two of the Clean Up instructions.
(See page 8.)
1
2
3
See manual for grounding
instructions
