Easy Start
Page 3 of 19
1.2 Important Safety Instructions
Please read these instructions carefully:
1. Unplug the HP01 HomePlug Ethernet Adaptor from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2. Do not use the HP01 HomePlug Ethernet Adaptor near water.
3. The HP01 HomePlug Ethernet Adaptor should never be placed near or over a radiator or heat register,
or in a built-in installation unless proper ventilation provided.
4. The HP01 HomePlug Ethernet Adaptor should be operated form the type of power indicated on the
marking label. If you are not sure of the type of power available, consult your dealer or local power
company.
5. The HP01 HomePlug Ethernet Adaptor relies on the building’s electrical installation for short-circuit
(over current ) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC or 230
VAC(depends on the power supply type in your country ) is used on the phase conductors(all
current-carrying conductors).
6. Plug the HP01HomePlug Ethernet Adaptor directly into a 100V AC ~ 240V AC(depends on the power
supply type in your country ) wall outlet. Do not use an extension cord between the adapter and the
AC power source.
7. Do not attempt to service the HP01 HomePlug Ethernet adaptor yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks as well as ruin product warranty.
Refer all servicing to qualified service personnel.
8. Unplug the HP01 HomePlug Ethernet Adaptor from the wall outlet and refer the product to qualified
service personnel for the following conditions:
-
If liquid has been spilled into the product .
-
If the product has been exposed to rain or water.
-
If the product does not operate normally when the operating instructions are followed.
-
If the product exhibits a distinct change in performance.
