Easy Start
Page 12 of 19
5 Configuration
Overview
The Powerline device uses 56-bit DES encryption to block outside access .The key is set by using the
software utility on the CD . By default ,the protection is enabled . However , it is recommended that you
change the default network password . All your Powerline devices must use the same network password
in order for the computers to be networked . Make sure that all devices are loaded with the same network
password .
Diagnose Powerline network
5.1 Diagnose a Local Powerline Device
Double click the PLCConfig icon on your desktop to open this utility show in the screen below
The Main tab shows the Powerline units that are connected to the current computer and other devices on
the network . It will also tell Mac Address of each device . It will let you refresh the window , if you
change devices , and also will allow you to connect to different networks if multiple units are connected
to your computer .
*Note*
If you do not see ANY unit in the device status , and there is a device connected to your
computer ,try to unplug all devices , and plug them back in . Also make sure that the cable connecting
your computer to the Powerline device is the right type and working correctly . If all of this seems to be
correct , and you still receive nothing in the Device window , try rebooting your computer . If the problem
still persists , please contact technical support .
