Easy Start
Page 19 of 19
sure its enable and working properly . Also , check your Ethernet cable , make sure you use the right type ,
it's plugged in correctly , and it's working properly .
Q.
I can't connect to internet and other computers on my power line network ?
A.
1. Check your IP address and TCP/IP protocol are set up properly for all the computers on your power
line network and try to ping your gateway
.
2.See if Powerline Configuration Utility to detect all other Powerline device on your power line
network .Try plugging both Powerline units into Adjacent sockets and see if the lights light up . If you are
still having a problem , please contact Technical Support.
Q.
How many Powerline devices do I need to setup a powerline network ?
A.
You must need two or more Powerline devices to setup a powerline network .
Q.
In order to making the Turbo Powerline Ethernet Bridge working properly , do I have to install the
Powerline Configuration Utility on every single computer who has the Turbo Powerline Ethernet Bridge
plug into it ?
A.
No , the Powerline Configuration Utility is a utility to diagnose or setup encryption for Powerline
device . Due to Turbo Powerline Ethernet Bridge is a fully plug & play device , no driver require to
install . So technically speaking , the Powerline Configuration utility is not a requirement to install on
your computer . In other words , you can install the utility , setup the encryption , and delete it from your
computer , but your Turbo Powerline Ethernet Bridge will still working properly .
Q.
How many Turbo Powerline Ethernet Bridges that I can install into one same Local Area Network ?
A.
It recommended install up to
15
Turbo Powerline Ethernet Bridges in one same password powerline
network .
