60
61
in the living room.
8.4. Teaching-out
Devices that have been taught-in to the wall-
mounting pushbutton can also be taught-out again. Te-
aching-out is performed separately for each channel/
position. To teach-out devices, proceed as follows:
• Open the configuration menu by
pressing and holding down the but-
ton on the left or right (<>).
•
The top menu level appears on the
display. Press the button on the left/
right (<>) to select the
“Channels menu” item.
• Press the button at the bottom (˅) to access the next
menu level.
•
In the next menu level you can
select a storage position (channel)
by pressing the button on the left/
right (<>). In this example, the “De-
corative light” device in room “Living
room” has been selected.
• Confirm your selection by pressing the button at the
bottom (˅).
•
Now press the button on the
left/right (<>) to select the “Teach-
out” item.
• Confirm your selection by pressing
the button at the bottom (˅).
• A confirmation prompt will then
appear.
•
The teach-out (delete) procedure
needs to be confirmed.
•
Select “No” or press the button at
the top (˄) to end the teach-out
procedure.
•
Select “Yes” or press and hold down the button at
the bottom (˅) for more than 4 seconds to perform
the teach-out procedure.
If several devices have been taught-in to one
channel or position, they are all taught-out to-
gether. Other channels/positions remain unaf-
fected by this teach-out procedure.
8.5. Selecting the language
The languages English and German are stored in the
display push-button for the purposes of operation and
menu display. To change the language, proceed as
follows: