46
47
the button and holding it down can trigger an additional
function for some actuators: with a dimmer, for examp-
le, pressing the button at the top or bottom and holding
it down will dim or brighten the light by degrees. The
configuration menu can be opened by pressing the
button on the left
(F)
or right
(H)
and holding it down.
For details on the configuration menu, please refer to
Section 8.
Press button
and release
Press button
and hold down
F
Select device/
channel
Open menu
H
Select device/
channel
Open menu
I
Trigger switching
operation
Trigger switching
operation
G
Trigger switching
operation
Trigger switching
operation
Display standby:
The display switches to
standby mode after approximately 10 seconds
to maximise battery life. Pressing any one of
the four sides of the pushbutton rocker will re-
activate the display. On reactivation, the first
channel or position 1 is displayed by default. The
(standby) time is set as described in Section 8.7.
Menu time-out:
The configuration menu is ope
-
ned by pressing the button and holding it down
(for longer than 4 seconds). After 60 seconds of
inactivity the menu closes automatically and the
display push-button returns to operation mode.
5. General information about the
HomeMatic system
This device is part of the HomeMatic home control
system and works with the bidirectional BidCoS® wire-
less protocol. All devices are delivered in a standard
configuration. The functionality of the device can also
be configured with a programming device and software.
The additional functions that can be made available in
this way and the supplementary functions provided by
the HomeMatic system when it is combined with other
components are described in the HomeMatic WebUI
Manual. You can find the latest versions of all technical
documents and the latest updates at
www.homematic.com.