Holzstar 5904150, Руководство по эксплуатации

Страница: 6 / 22

6 BTS-Series | Version 3.06
Intended Use
2.5 Safety signs on the Machine
The following safety signs and notes are applied on the
grinding system (fig. 1), which need to be observed and
followed..
Fig. 1: Safety labels
Damaged or missing safety symbols at the machine may
lead to errors with personal and material damages. The
safety symbols which are applied on the machine must
not be removed. Damaged safety symbols must be re-
placed immediately.The machine must be put out of ope-
ration from the moment when the labels are unable to be
recognized and understood at first glance, until new la-
bels are attached.
2.6 Regulations for safety and accident
prevention
The following instructions are to be followed by the ope-
rating personnel.
- The noise level (sound pressure level) of this ma-
chine may exceed 82 dB (A) at the workplace. In
this case, sound and hearing protection measures
are required and used by the operator.
- Before operating the machine, read the operating
instructions.
- Never touch rotating or moving parts.
- Always report electrical faults to an electrician.
- Always keep work clothes, long hair, jewelery etc.
away from the machine.
- Switch off machine when work is interrupted.
- Wear suitable safety clothing (accident prevention
shoes, safety glasses, etc.).
- Check safety devices for correct function before
starting work.
- Read and understand safety instructions attached
to the machine.
- Perform regular maintenance.
- Do not overload the machine.
- If the machine is not operating normally, the super-
visor must be informed immediately.
- Caution is advised when people are in the work
area.
- Never change the electrical system.
- Never remove mechanical or electrical safety de-
vices.
- Special attention is needed during transport or re-
construction; The transport regulations must be
followed.
3 Intended Use
The belt and disc sander is used exclusively for sanding
wood and wood-like materials (wood fiber board, chip-
board, plywood boards, laminated and non-laminated
boards, etc.). Grinding other materials can result in fire,
injury or damage. Please pay attention to the instructions
in the operating instructions as well as the information si-
gns on the machine. It must be connected to a suitable
extraction system. The belt and disc sanding machine is
suitable for private use, in schools, craft workshops,
workshops and for home improvement, suitable, not for
industrial use. Proper use also includes compliance with
all information in this manual. Any use beyond the inten-
ded use or otherwise is considered misuse.
Ear protection
Please wear ear protection when working with the
device.
2
3
4
1