Holzstar 5904150, Руководство по эксплуатации

Страница: 10 / 22

10 BTS-Series | Version 3.06
Settings
8.2 Working table
Take the worktable as shown in Fig. 5 and attach it to the
table support with 3 M6 x 1.0-14 hex bolts and washers.
Fig. 5: Mount the table support
Then hold the preassembled worktable to the grinding
machine as shown in Fig. 6 and fix it with the clamping
screw and a washer. The edge of the table must be posi-
tioned with a maximum distance of 2 mm to avoid pin-
ching workpieces or fingers between the table and the
grinding wheel.
Fig. 6: Mount the work table
9 Settings
9.1 Pivoting worktable
Loosen the clamping screw and bring the work table into
the desired position. Then tighten the clamping screw
again.
Fig. 7: Pivoting worktable
9.2 Align the working table
To align the work table exactly at 90 °, make a right angle
and hold it to the table as shown in Fig. 8. Then loosen
the table pivot clamping screw and align the table. Finally
tighten the clamping screw again.
Fig. 8: Align the work table
Table
Screw
Washer
Table support
Screw
Washer
Table
DANGER!
Before any intervention on the machine, it must be
disconnected from the power supply. Handling and
working with the machine is only permitted for per-
sons who are familiar with the handling and opera-
tion of the machine.
Table
Screw
Table
Angle
Scale Screw