Holzmann TS 315F-1500, Руководство пользователя

Страница: 30 / 59

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 30
Formatkreissäge / panel saw TS 315F-1500
 Flanges for fastening tool. They are secured by a key on the shaft to the loosening of the
tools to avoid the stop of the machine.
 Nut (left-hand thread!) For mounting on the tool shaft. wells for Adjusting the scorer.
 Rip fence. Is used for precise guiding of the workpiece in the longitudinal cutting. He is also
made of destructible material (aluminum).
 The setting of the parallel ruler is possible without the use of tools, and the position is read
on a graduated scale.
 Switch. While the belt is changed, with the door open, the engine will not start.
 Electronic brake for electrodynamic braking of the motor. Secures the tool brakes in less than
10 seconds after the drive off.
 Impeccable sharpened tools.
 The use of blunt tools is not permissible due to kickback, overloading the machine and pro-
duce poor surface during processing.
 Red wire support. For cutting operation where less than 120mm are cut off, less than 120mm
distance right of the blade to the rip fence. Here the wood by hand carry, but with the red
wire support.
3.5 Residual risk factors
Also in compliance with all safety regulations and when used following residual risks are considered:
 Risk of injury to the hands / fingers through the circular saw blade during operation.
 Risk of injury from contact with live electrical components.
 Risk of injury or ejection fraction or the circular saw blade circular saw blade parts, especially
case of overload and in the wrong direction.
 Hearing, unless arrangements have been made by the user for hearing protection.
 Risk of injury from kickback of the cuttings, the ejection of the cut material or parts of there.
 Risk of injury to the eye by flying debris, even with goggles.
 Risk due to inhalation of toxic dust in chemically treated wood Workpieces.
These risks can be minimized if all safety rules are applied, the machine is properly main-
tained and serviced the machine as intended and is serviced by a trained service professional.
Despite all the safety devices and remains her good common sense and your appropriate
technical qualification / training on the operation of a machine such as the sliding table saw
TS 315F-1500 is the most important safety factor!
4 ASSEMBLY
4.1 Preparatory activities
4.1.1 Scope of delivery
After receipt of the delivery, if all parts are in order. Report any damage or missing items im-
mediately to your dealer or the shipping company. Visible damage must also be recorded with-
out delay in accordance with the provisions of the warranty on the delivery, otherwise the goods
shall be accepted as properly.