Holzmann TS 315F-1500, Руководство пользователя

Страница: 32 / 59

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 32
Formatkreissäge / panel saw TS 315F-1500
4.2 Assembly of parts removed for transport
The sliding table saw is delivered pre-assembled. Sliding table, table top broadening, rip
fence, miter gauge, and protective hood and suction hose are aging to assemble.
4.2.1 Installation of the sliding table and the blade guard

Move the sliding table to the position on the machine body.
With the screws 8, Supplement plate 9 and 10 nuts to attach the sliding table on pedestal
base.
Before tightening adjust parallelism as described in 6.2.7 the sliding table with the horizon-
tal stop screws.

Mount the handle with the guide (C) with the screws 4 and 5 on the sliding table.

Install the edging shoe (A) with the screws 1, washer 2 and nut 3

Attach the blade guard (E) with screw 6 and nut 7 to gap wedge (D).
4.2.2 Mounting and adjusting the sliding table-
boom

First attach the sliding table-boom on the threaded
rod (C).

Move the sliding table extension arm (B) into the
guide on the sliding table (A).

Attach it to the desired location on the sliding table
with the locking handle (2)

Adjust the height of the sliding table bracket to the
threaded rod (C) on the same level with the sliding
table
.