Holzmann TS 315F-1500, Руководство пользователя

Страница: 40 / 59

MAINTENANCE AND CARE
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 40
Formatkreissäge / panel saw TS 315F-1500

The 6-point nut (D) is unscrewed with a wrench SW 19 and dismantled the saw blade from
the motor spindle.
ATTENTION: Use to hold the saw blade safety gloves!
Installation is in the reverse order of removal.
NOTE : Observe direction of rotation of the saw blade during installation!
6.2 Cleaning
N O T E
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the
machine!
Therfore: When cleaning water and mild detergent if necessary use.
Bare surfaces of the machine against corrosion impregnate ( with anti-rust WD40
)
6.3 Maintenance
All parts (except the bearings of the main saw mandrel) should be lubricated twice weekly.
6.4 Disposal
Do not dispose of the TS 315F-1500 in residual waste. Contact your
local authorities for information regarding the available disposal op-
tions. When you buy at your local dealer for a replacement unit, the
latter is obliged to exchange your old