Holzmann FS 200SF, Руководство пользователя

Страница: 11 / 44

ENGLISH
MAINTAIN SAFETY GUARDS, COMPONENTS AND SIGNS
NEVER FORCE YOUR MACHINE
DO NOT OVERREACH
SECURE SMALL WORKPIECES
MAINTAIN TOOLS WITH CARE
It will do a better job if used at its designed output rate.
Forcing your machine shortens it`s lifespan, may cause machine
defects and poses a security risk.
Keep proper footing and balance at all times.
When processing small workpieces, fix them with a suitable de-
vice like a vice, downholder, to avoid accidents.
Do not fix or feed small workpieces by hand.
Keep your hands away from dangerous area, allways guide the
workpiece or tool securely.
Assure yourself to keep your working tools always sharp and in
best working condition.
Defect or blunt tools pose a security risk.
Assure yourself, that all safety guards and safety devices of your
machine are working in best condition. Damaged Safety guards
have to be repaired before using the machine again.
Check the function of the machines Safety components like
Emergency OFF Buttons and Disconnectors in regular intervals.
Defect Safety components have to be replaced immediately.
Check the condition of the Safety signs and operation rule plates
on your machine. Replace missing or non-readable ones.
Before leaving the machine, shut it off and wait until the motor
and all rotating parts stop.
Form a habit to check that there are no tools, keys, wrenches ...
on the machine/tool before you start the machine.
Remove all accessories and tools from the machine before you
switch it on.
NEVER LEAVE MACHINE RUNNING UNATTENDED
REMOVE UNUSED TOOLS, KEYS, WRENCES