CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
22
NTS200FLEX
When sharpening move the tool in a pendulum movement to the left and right until the
blade is uniformly sharp.
Repeat the process on the other side of the blade
After sharpening:
lift the knife from the grinding wheel
Switch of the machine („0“)
Before new sharpening wait till the grinding wheel stands still
13.4
Polishing
To optimize the sharpness of the tool or knife it is necessary to polish the blade.
Attach the knife or tool to the leather honing wheel and press with low pressure. When polishing
move the tool or knife in a pendulum movement to the left and right.
N O T I C E
To avoid damaging the leather honing wheel, always work in the direction of
rotation of the leather honing wheel!
In exceptional cases it is necessary to polish without the use of the tool rest.
C A U T I O N
Keep highest attention when polishing a blade without universal holder
To touch the rotating polishing wheel can result in serious injury
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
14.1
Cleaning
N O T I C E
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the machine's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil.
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.
Therefore, clean the machine after each use, at least once a week..
14.2
Maintenance
W A R N I N G
Danger due to electrical voltage! Handling the machine with the power supply up
can lead to serious injuries or death. Always disconnect the machine from the power
supply before servicing or maintenance work and secure it against unintentional
restarting!
Instructions for the regular maintenance and testing of the machine, the separating and non-
separating protective devices and other directly acting safety elements (e.g. components of the
spindle brake) must be given here.
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
Before each start-up, make sure that the safety devices are in perfect condition and
function properly.
Check all connections for tightness at least once a week.
Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
