HOLZMANN MASCHINEN NTS 200FLEX, Руководство по эксплуатации

Страница: 21 / 30

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 21
NTS200FLEX
Leather honing wheel:
Cover the surface of the leather honing wheel with a thin layer of grinding paste
Torque adjustment:
The maximum torque to be transmitted can be set with the knob.
13.2 Sharpening
The angle guide helps to identify and maintain the cutting angle on a variety of tools.
13.2.1 Grinding angle setting
 Place the tool (3) in the tool rest (2) and fix with
the fixing screws
 Insert the tool rest over the universal support (1)
 The distance from the tool rest to the grinding
wheel is intended to be as low as possible in order
to control the sharpening process optimally!
 Place the angle guide (4) on the grinding wheel
with the desired angle notch against the wheel and
adjacent to the universal support
 Adjust the positioning of the tool and the universal
support height as necessary so that the sharpened
edge of the tool is flat against both the grinding
wheel (5) and the angle edge on the angle guide.
13.2.2 Sharpening tools
After the correct grinding angle setting:
 Lift the tip of the tool from the grinding wheel
 Switch on the machine („I“)
 Choose the required grinding speed and direction. Wait until
desired speed is reached and the grinding wheel is saturated
with water completely
 Press the to sharpen tool against the grinding wheel
 When sharpening move the tool in a pendulum movement to the left and right until the
tool tip is uniformly sharp.
 The tool must cover at least the half of the grinding wheel width to prevent damage the
grinding wheel!
After sharpening:
 Lift the tip of the tool from the grinding wheel
 Switch of the machine („0“)
 Wait till the grinding wheel stands still
 Remove the tool from the tool rest
N O T I C E
Be aware to choose the correct grinding stone direction
depending on tool position.
13.3 Sharpening knifes
 Switch on the machine („I“)
 Let the machine reach the full speed and wait till the grinding wheel is saturated with
water completely
 Attach the knife to the grinding wheel and press with low pressure