HOLZMANN MASCHINEN K5 315VF-2000, Руководство пользователя

Страница: 56 / 94

MAINTENANCE
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 56
5-fach Kombination / combined 5-operation machine K5 315VF-2000
2
planer knives
3 pressure wedge
4 fixing screw
5 Cutter block
 Eccentric lock unlock and open as shown planer.
 Fixing screws (4) loosen.
 Planing blade (2) is automatically pushed out by the pressure spring (1). Planer blades
(2) and pressure wedge (3) completely dismantled.
 Clean the cutter shaft and all growing parts thoroughly.
 Insert new planer blades with pressure wedge.
 Press planer blades down and screw with locking screws.
 Planer blades must not protrude more than 1.1 mm! Recommendation: clearance on 0.7
- Setting 0.8 mm.
 Do not use a planer knives with a height of less than 17 mm due to the low surface ten-
sion!
A T T E N T I O N
Don’t clean or do maintenance on the machine while it is still connected to the pow-
er supply:
Damages to machine and injuries might occur due to unintended switching on of the
machine!
Therefore: Switch the machine off and disconnect it from the power supply before
any maintenance works or cleaning is carried out
The machine is low maintenance and contains little parts that must undergo a maintenance oper-
ator.
Faults or defects that may affect the safety of the machine, must be rectified immediately.
Repair work may only be performed by qualified personnel!
The complete and utter cleaning ensures a long life for the machine and represents a safety re-
quirement.
After each shift the machine and all its parts must be thoroughly cleaned by the dust and swarf
sucked through the suction system and all other waste is disposed of by compressed air.
Check regularly that all warning and safety instructions on the machine and available in a perfect-
ly legible condition.
Check before every use the perfect condition of the safety devices.
For storage of this machine may not be stored in a humid room and must be protected from the
influence of weather conditions.
 The elimination of defects does your dealer
 Repair work may only be performed by qualified personnel!