HOLZMANN MASCHINEN K5 315VF-2000, Руководство пользователя

Страница: 48 / 94

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 48
5-fach Kombination / combined 5-operation machine K5 315VF-2000
13.4.3 Adjustment of splitting wedge

The riving knife is adjusted according to the size of
the saw blade.

To do this, loosen the screw E and align the riving
knife accordingly.

After setting the correct distance tighten the screw E
again firmly.
13.4.4 Sets the speed for the saw blade and spindle shaper speed
The combined 5-operation machine has 4 different blade speeds
(see technical data).

Disconnect the machine from the power supply .

Open the machine door .

The wing screw open until the belt is loose .

Place the belt to the desired position .

Tighten the thumb screw again .

Close the machine door again .
13.5 Notes of using the circulas saw
Cross-cutting of workpieces made of solid wood
When performing this operation, the following equipment shall be used for safe working:

The table extension

the miter gauge

the guard of the saw blade

the riving knife

the hold-down

the insert in the table
thumbscrew