HOLZMANN MASCHINEN K5 315VF-2000, Руководство пользователя

Страница: 51 / 94

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 51
5-fach Kombination / combined 5-operation machine K5 315VF-2000
 Angle stop thread in bracket and secure with the fixing screw A.
 Loosen fixing angle B and swing angle stop at 90 °.
 Screw position angle fixation.
 Lower the cutter shaft cover C so that the planer is coverd.
 Move apron planer shaft cover to the workpiece and secure it with a
distance of abojut 5mm.
 Hang up when dressing the part with the narrow side on the jointer
and press with one hand against the fence angle and jointer.
 Push the workpiece with the second hand slowly and evenly over
the planer.
14.3.2 Planing with a titled angle stop
 Loosen fixing angle.
 Place the workpiece and press against jointer and angle stop
.
 The relaxed angle stop aligns the workpiece.
 Fix position of the aligned angle stop
Lower the cutter shaft cover so that the planer is covered:
 Move apron planer shaft cover to the workpiece and secure it with a distance of about 5 mm.
 Hang up when dressing the workpiece at the jointer and press with a hand against the stop
bracket and jointer.
 Push the workpiece with the second hand slowly and evenly over the planer
14.3.3 Planing short workpieces
When planing of short workpieces, a push stick or similar is to
use!
 Adjust the angle stop and planing shaft cover on the size of
the sliding stocks.
 Place the workpiece and push with push stick slowly and
evenly over the planer.
C
B
A