HOLZMANN MASCHINEN ED 300FD, Руководство пользователя

Страница: 31 / 54

SAFETY GUIDELINES
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 31
METALLDREHMASCHINE / METAL TURNING LATHE ED 300FD
 Avoid short as possible clamping conscious .
 Be always the technical limitations of your tools and clamping conscious.
In particular, you should NEVER use any tool at speeds for which it is not permitted!
 Thread cutting and editing of imbalances objects should generally be carried out at very low
speeds.
12.4 Remaining risk factors
W A R N I N G
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is re-
quired. A safe working depends on you!
Also in compliance with all safety regulations and when used properly, the following residual risks
must be observed:
 Risk of injury to the hands / fingers through the rotating lathe chuck during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a suitable tool /
device workpiece.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up by rotating lathe
chuck! Severity of injury! Safety regulations must be observed with regard to clothing.
 Risk of injury due to contact with live electrical components.
 Risk of injury by tipping the machine.
 Risk of injury due to dust emissions, treated with harmful agents workpieces.
 Risk of being cut by drilling edges untrimmed.
 Risk of injury to the eye by flying debris, even with goggles.
These risks can be minimized if all safety rules are applied, the machine is properly maintained and
serviced the machine as intended and is serviced by a trained service professional.
Despite all the safety devices and remains her good common sense and your corresponding technical
suitability / training on the operation of a machine of the most important safety factor!