Page | 5
H-RTK
Connect the both the ground station GPS unit (H-RTK M8P Helical or H-RTK M8P Base) and the
telemetry radio to your laptop using the supplied USB cables.
On the UAV side connect the H-RTK M8P Rover Lite to the GPS port on your flight controller using
the 10 pin connector cable.
Connect another telemetry radio to the TELEM1 interface of the flight
controller. Be aware that older Pixhawk flight controllers may not have the right connector.
Before you start the setup, make sure both units have a good view of the sky so they can receive the
best signal from the GPS satellites.
