Page | 17
H-
RTK
absolute accuracy of the base station, the longer the star search time will take. The data of star
search and location of base station can be viewed in the nav-> SVIN page in Message View.
The base station can also be set to fixed-point mode. When the current precise geographic
coordinates of the base station are known you can manually input those into the base station.
This can be used instead of waiting for the base station GPS to establish a lock of sufficient
accuracy. You only need to change the Mode to Fixed Mode on the
TMODE3
tab, and then enter
the known base station location as shown below.
After setting the star search and fixed point mode, please click the
Send
button at the bottom left
of the page to transfer the modified data to the base station.
Changing the GPS satellite systems (GPS+GLONASS)
By default, the uBlox 1.30 firmware uses the GPS+GLONASS navigation system for location
services. If you want to change to GPS+ beidou navigation system, then you need to enter
Messages view-> Cancel the Enable option, and then check beidou's Enable option. After
selecting, click
Send
to store the changes.
