Holtkamp Electronics Chip card terminal techn. stand 05.2018 4145_01.2021
- 5 -
7
Illustration of the device
1
USB connection
2
Card slot
3
Display
4 Keyboard
8
Configuration and
programming of the
Chip card terminal
8.1 Service chip cards
With the Holtkamp service cards you can call the programming
menus and enable the revaluation of chip cards.
Quering card type 33:
call the statistic menu, you
can call the data therein on
the display.
Quering/delete card type 43:
call the statistic menu, you
can call the data therein on
the display and delete with a
keypress.
Key card type 53:
call the general programming
menu, there you can take
some settings.
8.2
Configuration menu
By first operating of CHIP CARD TERMINAL, it must any confi
-
gurations adjusted as needed, if this not made at delivery.
to call with:
Insert configuration card
type 83
Leaf through the menu items:
short press: scroll forward
press for long: scroll backwards
OK
change menu items:
If a numeric value necessary, enter with buttons:
to and .
If a confirmation necessary, enter with buttons:
(no) and (yes)
Cancel the changes:
The primary value can be restored with activity of
-button for long (does not apply for yes/no-settings).
0
9
,
C/CE
Revaluation card type 73:
With this chip card you can
switch the chip card termi-
nal temporary to the revaluati-
on mode, so you can revaluate
chip cards from type 11, 14
and
15
Configuration card type 83:
call the configuration menu.
1
2
3
4
