Holder A-Trac 5.58 P, Руководство по эксплуатации

Страница: 159 / 190

Operating Instructions
145 146
157
A 5.58 / A 5.58 P
Maintenance every 1000 Service hours
Lubricating the Cardan Shaft Nipples
- Turn the steering wheel right or left until the steering
stop is met.
CAUTION
Carry out services in the articulated joint area
only with the engine shut off.
- Remove the rubber protector.
- Adjust the top cardan shaft (1) by hand until the grease
nipples are easily accessible.
- Grease the top cardan shaft.
- Move centre cardan shaft (2) with starter until grease
nipples are easily accessible.
CAUTION
Make sure no one is standing in the area of
the articulated joint when the starter is oper-
ated.
- Grease the middle cardan shaft.
- Adjust the lower cardan shaft (3) by moving the tractor
forward or back until the grease nipples are easily
accessible.
- Grease the lower cardan shaft.
- Refit the rubber protector at the articulated joint.
Bild_130
1
2
3