Holder A-Trac 5.58 P, Руководство по эксплуатации

Страница: 130 / 190

A 5.58 / A 5.58 P
Operating Instructions
128
145 146
General Remarks on Maintenance
• Do not run engine in enclosed spaces! Danger of
poisoning!
• To prevent the danger of fire, keep the tractor and
implements clean!
• When leaving the tractor, secure it against rolling and
unauthorized use (parking brake, chocks), stop the
engine, remove the ignition key and, if required, lock the
cabin.
• Do not leave the tractor unattended on roads as long as
the engine is still running.
• If external current consumers are connected, eg equip-
ment with solenoid valves, protect them with diodes
against back currents. If not, the traction electronics
could be affected.
• Operate the equipment only if all guards are installed
and in position.
• Install and remove the articulated shaft only with the
engine stationary.
• When working with the PTO shaft, no one should be
standing in the area of the rotating PTO and articulated
shaft.
• The guards for the articulated shaft and the PTO shaft
must be installed as specified.
• When the articulated shaft is removed, refit the protec-
tive cap on the PTO shaft.
• Do not perform any welding, cutting and grinding work
on carrying and other safety-relevant parts such as
tractor frame, axles, trailer hitch, etc.
• The mounting of tyres requires sufficient knowledge
and special mounting tools.
• Only use genuine spare parts or qualitatively equiva-
lent, commercially-available parts. Use the parts in the
list of maintenance parts in the chapter entitled „Main-
tenance Data“.
• Before taking into service and after servicing or repair,
the tractor and the implement must be checked for road
worthiness and operating safety.
• Brakes may be readjusted, but have the brake lines
replaced by your authorized workshop.