HOKKIM HAMF-4, Руководство пользователя, Страница: 10 / 15

S6 To volt-free fault signal contacts (Normally Open) No. 6. Close to +ve or -ve to trigger.
S7 To volt-free fault signal contacts (Normally Open) No. 7. Close to +ve or -ve to trigger.
S8 To volt-free fault signal contacts (Normally Open) No. 8. Close to +ve or -ve to trigger.
TERMINALS 11 TO 44 - DELAY CLOSE CONTACTS
11
Oil Pressure Delay contacts (Normally Open) No. 1.
14 Oil Pressure Delay contacts (Normally Open) No. 1.
21 Oil Pressure Delay contacts (Normally Open) No. 2.
24 Oil Pressure Delay contacts (Normally Open) No. 2.
31 Oil Pressure Delay contacts (Normally Open) No. 3.
34 Oil Pressure Delay contacts (Normally Open) No. 3.
41 Oil Pressure Delay contacts (Normally Open) No. 4.
44 Oil Pressure Delay contacts (Normally Open) No. 4.
NOTE: You can have options of 1, 2 or 4 oil pressure delay contacts.
TERMINALS C1 TO C8 - ALARM EXTENSION
C1
To Extension Fault Alarm Relay Board FARX terminal R1 . For use, if required.
C2 To Extension Fault Alarm Relay Board FARX terminal R2 . For use, if required.
C3 To Extension Fault Alarm Relay Board FARX terminal R3 . For use, if required.
C4 To Extension Fault Alarm Relay Board FARX terminal R4 . For use, if required.
C5 To Extension Fault Alarm Relay Board FARX terminal R5 . For use, if required.
C6 To Extension Fault Alarm Relay Board FARX terminal R6 . For use, if required.
C7 To Extension Fault Alarm Relay Board FARX terminal R7 . For use, if required.
C8 To Extension Fault Alarm Relay Board FARX terminal R8 . For use, if required.
Note: There are three types of alarm extension available. 1) NFAR-1 for single alarm.
2) FARX-4 for four alarms.
3) FARX-8 for eight alarms.
Page 10
HOKKIM
giving you control
Control & Protection Relays