Wild Boar Audio Contact Information
Email: [email protected]
Tel: 705-719-6361
Thank you for your purchase of Wild Boar Audio’s WBA 600.4 Amp.
We want your new amp to work as well as it was designed to, so if you
have any questions or concerns, please email: [email protected] or call
us during regular business hours at 705-719-6361 (EST). If you still need
help, please consider a professional installation by your dealer.
Important:
1) In order for your new amp to work properly, your radio must have
the proper “flash” installed. Different radio flashes are used by the
“MoCo” based on the factory audio system that comes on different
model bikes. Re-flashes can be done at any OEM dealer, or a
“Techno Research” dealer. You can find the nearest Techno
Research dealer by visiting:
http://technoresearch.com/index.php/tuning-centers
The required flash to make this amp work best is called “4 speaker
no amp” and will give highest quality sound and best reliability. It
should be noted that non CVO Ultra models and Ultra Trike models
come from the factory with the required “4 speaker no amp flash.”
2) This kit is set up to power fairing and lid speakers, or fairing and
lower speakers, and does NOT include a wire harness to work the
rear speakers on an Ultra Classic and have the fader work. If you are
installing this amplifier on an Ultra Classic and want the rear “pod”
speakers to be controlled using the radios fader, you will need a
Wild Boar Audio “WBAURH” Ultra Rear Harness (Drag Specialties
Part #2120-0900)
This manual is written in 2 major sections:
Section 1:
Installation for Street Glide/Ultra Models
Section 2:
Installation for Road Glide/ Road Glide Ultra Models
IMPORTANT: Read the next page before installing!
