10
As the amplifiers come in the box, they are “stuck” to a mounting plate for use in
FLH (Batwing) model bikes. “Peel” the amps off the plate and put that plate aside
as it’s not required for FLTR (Road Glide) installations.
In order for the system to work properly you will need to have the correct “flash”
in your radio. Visit an HD dealer, or link:
http://technoresearch.com/index.php/tuning-centers.
Any dealer on that web page should be able to help. You either want to have the
correct flash installed, or verify that the correct flash is installed if you are not sure.
In all cases, the preferred radio flash is called “4 speaker no amp”. There is a
3 position switch “Radio Flash Selector” on the side of each amp marked A, B,
and C. Understanding the correct position for your application is VITAL in the
proper performance of this system. More detail on these position is later in the
manual right before the amps get physically mounted to your bike.
The image below will be one you can reference throughout the installation. Please
take a minute and familiarize yourself with the items listed below in the image.
ro A d gl i d e i ns tA llAt ion
section 2
A
B
C
D
Figure 1.1
A
= Mounting points for Headlight assembly
B
= Wire passage from fairing to bike
C
= Brake side speaker harness (Pink and Pink with Black Stripe wires)
D
= Clutch Side Speaker harness (Pink and Pink with Black Stripe wires)
