5
Step #11: The last connection inside the fairing is to connect the second set of
speakers in the system to the slave (right side) amplifier.
If using Hogtunes lids, the harness included with the lids will work its way
up the bike, and plug right into the amplified out “pigtail” on the slave
(right side) amplifier. If you are installing this on an Ultra Classic model
and have the Wild Boar Audio “WBAURH” Ultra Rear Harness, please
go to the manual that came in that box.
In all other cases (such as lower glove box speakers) you will use the
“ACC” harness that came in this kit that has a 4 pin black plug on
one end, and no plug on the other. This will plug into the amplified out
“pigtail” on the Slave (right side) amplifier and you will “hardwire” your
second set of speakers to this harness. The wires on the supplied ACC
harness are clearly labeled which will make wiring easy, but to avoid
unnecessary warranty calls, please take EXTRA CARE of joining the wires
together.
Step #12: The power/ground harness will pass through the inner fairing where the
main wire harness passes through on the brake side of the bike. If your
comfortable removing and re-installing the fuel tank, the wires can go in
the factory wire “chase”. Alternatively, you can loosen the tank’s “chrome
console” and run wires up and over the gas tank, but under the tank’s
chrome console. There is a provision on the front of the tank console for
wires to pass.
NOTE:
During some routine bike services, the fuel tank
will be removed. Having the wires going up and over the tank could be
an inconvenience for the technician.
This amplifier comes set up to power front speakers and
speakers either in lids, or fairing lower glove boxes only. If you
are installing this amplifier on an Ultra Classic, you will need a
Wild Boar Audio “WBAURH” Ultra Rear Harness if you want to
power speakers in factory rear speaker “pods”, and have the
radio’s fader function properly.
stock Harness and Amplifier’s
Harnesses Passing from fairing To
Just In front of Tank (Arrow A).
Cable Tying the Harnesses To The
Main Bike Harness Just In front of
The Tank (Arrow B) Allows The Amp
Harnesses To go Up Towards
The Tank’s Chrome Console easier
And Makes for a Cleaner Install.
