background image

8

P/N: EAM0066G38A

P/N: 8-23562A

P/N: EAL0424G33A

P/N: EAL0424G33A

Safety

8-23562A

Risk of electrical shock. 
High voltages are present within the unit.

• 

There are no user serviceable items within the unit.

• 

Service on the unit must be performed by qualifi ed 
personnel.

• 

Do not open any part of the unit other than noted 
and allowed areas.

• 

Turn power switch off and unplug the unit before 
servicing.

CONTACT WITH HIGH VOLTAGES CAN CAUSE 
DEATH OR SERIOUS INJURY.

EAL0424G33A 

(symbol on Dangers Plate)

Danger of crushing (upper and lower limbs).

• 

Become familiar with all controls before 
proceeding with operation.

  Keep hands and feet at a safe distance from all 

moving parts.

  To begin with activate the various commands in 

short bursts to better control their operation.

  Keep away from the mount/dismount tools when 

they are in use

  Do not allow unauthorized people in the work area.

  Pay attention when the lifter is functioning.

  Keep lower limbs at a safe distance.

CONTACT WITH MOVING PARTS COULD CAUSE 
INJURY.

EAL0424G33A 

(symbol on Dangers Plate)

Danger of crushing (body).

• 

Comply with the indications of the spaces required 
for positioning the machine in the work area.

  Clearly mark the work area, within which only the 

operator can work and move.

  Do not allow unauthorized people in the work area.

  Pay attention to the movement of the lifter, the 

range of action of the operating arms and generally 
to the position of every mobile part of the machine.

  Keep within the designated work area for 

operators.

EAM0066G38A

Danger moving parts.
Black and yellow striped tape.

• 

The tape indicates the presence of moving parts.

• 

These parts can be potentially dangerous.

• 

Pay attention when activating parts marked with 
this type of warning sign.

•   

Keep at a safe distance when they are moving.

IMPORTANT!! SAVE THESE 

INSTRUCTIONS

..

..

..

..

 

-

 .

..

..

.

Содержание monty 8600 ADVANCED

































































































Отзывы: